iCanTek iCanView 222 User Manual page 14

iCanView222 User's Guide
Standard PoE Hub
Figure 2-4. Connecting Network camera using Standard PoE (802.3af).
AC In
Figure 2-5. Conventional way of connecting network camera without standard PoE.
<Caution>
When power is applied through standard PoE, never apply power through AC
adaptor. iCantek assumes no responsibility for the damages caused by collision of
the power through the standard PoE and AC adaptor.
2. Install "IP installer" and "i-NVR" on your PC.
Detailed information for installing these programs can be found in
Guide] and [i-NVR User's
3. Assign IP address to iCanView222 using IP installer.
Hub
AC Adaptor
Guide], respectively.
100BaseT
DC In
[IP-Installer User's
Rev.1.0 (Mar. 2008)
14