iCanView220/220W User's Guide
on the IP sharing device, will forward to the appropriate device's IP address. If you only plan to
access multiple units from within a local area network, you do not need to change the RTSP and
HTTP port numbers, unless other IP sharing devices sit in-between the client and the IP video
products. For more detailed information regarding the use of IP sharing device refer to the
document
[Use of Private IP network using
3.2. Connecting to xDSL/Cable Modem
1. Follow through steps 1 to 4 in Section 2.5 to assign IP address and other network parameters to
iCanView220/220W.
2. Install iCanView220/220W and connect it to xDSL or Cable modem as in Figure 3-2.
Figure 3-2. Connecting the iCanView220/220W to ADSL Modem
When fixed IP address is assigned to the xDSL or Cable modem, follow the same way as
assigning IP address for the case of LAN using IP-installer. To enable the notification of the
changed IP address to the user over e-mail when the IP address is changed in floating IP
environment, you have to assign the e-mail address when user name and password are
IP-sharing-device].
Rev.1.0 (Aug. 2006)