4. Tighten the crankcase cover bolt slowly to the prescribed torque.
5. Wait 20 minutes after installation before filling with oil and starting the engine
Cylinder block
机体
直径1.5-2mm密封胶
Sealant: 1-1.5mm diameter
12.6 Inspection
● Inspection of oil alarm
(1) Stand the oil alarm, check the oil alarm output wire and copper earth wire, there should be no
continuity.
(2) Bottom up the oil alarm; check again, there should be continuity.
(3) Bottom up the oil alarm completely in the oil, check the float, there should be no continuity.
76