Kipor KGE12E Operation Manual
  1. Manuals
  2. Brands
  3. Kipor Manuals
  4. Portable Generator
  5. KGE12E
  6. Operation manual

Kipor KGE12E Operation Manual

Gasoline generator
Hide thumbs Also See for KGE12E:

Advertisement

Table of Contents

WUXI KIPOR POWER CO., LTD.
GASOLINE
GENERATOR
KGE12E
KGE12E3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KGE12E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Kipor KGE12E

Summary of Contents for Kipor KGE12E

  • Page 1 WUXI KIPOR POWER CO., LTD. GASOLINE GENERATOR KGE12E KGE12E3...
  • Page 2 PREFACE Congratulation and thank you for your purchase of our unit; our aim is to provide a high-quality generator set to achieve customer satisfaction, and we are confident that your choice will be justified. This manual, dealing with the generator side of the unit, gives all the basic information to ensure satisfactory and reliable operation of your unit.

  • Page 3: Table Of Contents

    1. NAMES OF IMPORTANT PARTS AND COMPONENTS CONTENTS KGE12E Control Panel 1. Names of Important Parts and Components 2. Preparatory Steps for Operation Ammeter Voltmeter Engine switch Fre. meter 3. Safety Precations for Servicing Single phase receptacle (25A) Main switch 4.
  • Page 4 Specification MODEL KGE12E KGE12E3 Prime 8.5kVA 10.5kVA 50Hz OUTPUT Standby 9.5kVA 11.5kVA Single/Two line Phase Three/Four line Power Factor Voltage *230V *400V Excitation System Self-excited Pole Drive System Directly coupled to engine Voltages Regulation 1.5%( Rated Speed) MODEL KG690 12.0kW/3000rpm, 14.0kW/3600rpm...

  • Page 5: Preparatory Steps For Operation

    3. SAFETY PRECATIONS FOR SERVICING 2. PREPARATORY STEPS FOR OPERATION A). Only qualified persons should test, maintain., and repair this unit. 1) Environmental Requirements B). Always wear a face shield, rubber gloves and protective clothing 1-1) Outdoor use when working on the unit. A) Install your unit in a dry and dustless place.

  • Page 6: Warm-Up Procedure

    4. WARM-UP PROCEDURE 5. STARTING-UP PROCEDURE A) Check all fluids daily. (The unit is shipped without lubricating oil.) A) Return speed control level to left position. B) Turn the fuel cock to ON position. B) Ensure voltmeter indicates normal. C) Set the main switch to OFF. C) Set the main switch to ON.

  • Page 7: Simplified Troubleshooting Guide

    7. SIMPLIFIED TROUBLESHOOTING GUIDE 8. MALFUNCTION AND COUNTERMEASURES This guide is intended to give brief information for troubleshooting with Complaint Remedy Possible cause no testing or measuring instruments to check the unit. 1. Speed up engine until rated However, testing and measuring instruments are required to diagnose 1.

  • Page 8: Electrical Skeleton Diagram

    ELECTRICAL SKELETON DIAGRAM...

  • Page 9: Appendix

    Modified coefficient table of ambient condition power 10. APPENDIX The conditions of generator rated output: Altitude: 0 m Ambient temperature: 25 Relative humidity: 30% The choice of the electric cable The choice of the electric cable depends on the allowable current of the cable Ambient modified coefficient: C (Relative humidity 30%) and the distance between the load and the generator.

This manual is also suitable for:

Kge12e3

Table of Contents

Save PDF