Kipor IG2000 Shop Manual page 33

3) Turn the rotor to set the piston at top dead center of the compression stroke.
Timing line of camshaft driving chain should align with the cylinder head seal. Insure the intake
and exhaust valves are closed.
Caution
■ If the intake valve is open, turn the rotor again to align the timing line with the cylinder head
seal and both the inlet and exhaust valves should be closed.
4) Insert a feeler gauge between the rocker arm and the valve and measure the valve clearance.
Valve clearance
正时标记
Timing mark
Inlet valve
进气门
IN
EX
32
气缸盖罩
Cylinder cover
排气门 Exhaust valve
旋转方向
Revolve direction
0.06mm
0.08mm