Kipor IG2000 Shop Manual page 27

Epa/carb/cetl certified models

Hide thumbs Also See for IG2000:

Table of Contents

维修盖

Maintenance cover

Cover screw

螺钉

机油尺

Oil dipstick

■ Replace the engine oil

1. Disassemble the oil dipstick and oil drain bolt, drain used oil.

2. Tighten the oil drain bolt..

3. Refill with clean oil. (Oil capacity is 0.4L)

※ Recommended oil: SAE10W-30 or SAE30, API Service Classification SE, SF or SG.

4. Check the oil level; fill to the upper limit level if necessary.

5. Tighten the oil dipstick.

■ Please dispose of the used motor oil in a manner that is compatible with the environment. We

suggest you take used oil in a sealed container to your local recycling center or service station for

reclamation. Do not throw it in the trash; pour it on the ground, or down a drain.

■ Drain the used oil while the engine is warm. Warm oil drains quickly and completely.

Oil fill port

加油口

Upper level

上液面

下限位

上限位

Upper limit

Lower limit

Table of Contents

Show Quick Links

Table of Contents

Ig2000p Ig2000s