● Igniter (Ignition module)
Pull off the 10P receptacle from the module. Measure the resistance by connecting one test lead
with the metal outer case of the engine and the other lead with the 10P connector.
Color
Blue
Orange
Yellow
Yellow/Green
Green
Red
Circuit unit
Primary coil of the ignition coil
Oil level alarm
Trigger coil
Ground wire
Igniter unit power coil winding
Engine switch
兰 橙 黄 黄
Blue Orange Yellow
Yellow/
绿
Green
熄火开关
Engine
(油开关)
switch
There should be no continuity with correct
There should be no continuity with the
switch ON, continuity with the switch OFF
绿 红
Green Red
ON
OFF
47
Standard resistance
0.8-1.3Ω
oil level
80-130Ω
Continuity
0.26-0.28Ω