Scan Engine Settings; Symbologies Supported - CipherLab 9400CE Reference Manual

Table of Contents

SCAN ENGINE SETTINGS

The Reader Configuration Utility (94ReaderCfg.exe) allows configuring the following reader

types, depending on the module equipped on your mobile computer:

1D CCD scan engine

1D Laser scan engine

2D scan engine

RFID reader

Options of different reader combination are allowed, such as 1D+RFID and 2D+RFID. For each

combination, both readers can be initialized and ready for scanning at the same time (dual mode

operation). For example, if you press the [Scan] button while running the 94ReaderCfg applet on the

mobile computer, it will read a barcode in position or an RFID tag in proximity depending on which

one comes first.

Note: You cannot have 1D+2D scan engines installed on the mobile computer because they are

both barcode readers!

Varying by the scan engine installed, the supported symbologies or tag types are listed below. For

details on configuring associated settings, please refer to each Appendix separately.

Codabar

Code 11

Code 93

Composite Code

MSI

Plessey

Postal Codes

Telepen

Code 128

EAN-128

ISBT-128

Appendix I

CCD, LASER

Table of Contents