Table of Contents
Advertisement
A circular icon of the letter "F" will appear on the status bar. This modifier key is hold down as
long as the icon is displayed.
2) Now press another key to get the value of key combination (say, press [1] to get the value of
F1). The icon will go off now.
3) To get the value of another key combination modified by the [Func] key, repeat the above steps.
4) To abort the key modification, press
Note: It is not necessary to hold down the [Func] key.
The functionality of each key combination is application-dependent. Below is a list of the factory
setting for a variety of key combinations.
KEY COMBINATION
,
,
,
,
,
,
,
Note: Press the [Func] key first, and then press the second key for a specific function.
1.3.4 PROGRAMMABLE KEYS
Two user-definable keys, named P1 and P2, are provided on the keypad. Together with the SCAN
key as well as the four side triggers on each side of the touch screen, they can be re-defined as
another key or to serve as a shortcut key for launching a specific program.
Refer to the
Button Assignment
Note: By default, the four side triggers are programmed to serve as ENTER keys (upper ones) as
well as SCAN keys (lower ones).
1.4 TOUCH SCREEN
The mobile computer comes with a 3.5" TFT graphic LCD, 320 by 240 pixels resolution (QVGA).
again, and the icon will go off.
ACTION
PgUp (red-coded): move text up one screenful
PgDn (red-coded): move text down one screenful
Home (red-coded): move to the beginning of screen or document
End (red-coded): move to the end of screen or document
Toggle ON/OFF the backlight of keypad only
Turn ON the backlight of LCD and decrease its luminosity
Turn ON the backlight of LCD and increase its luminosity
Utility.
Chapter 1
Using the 9400CE Mobile Computer
15
Advertisement
Table of Contents
