Table of Contents
Advertisement
9400CE Mobile Computer
4.1 WIRELESS POWER MANAGER
Wireless Power Manager is a control panel applet, which allows you to choose and enable
802.11b/g or GPRS card.
Note: Meanwhile, you may enable Bluetooth connectivity through the Bluetooth Manager.
1) Double-tap the associated icon
2) Select the wireless connectivity you desire, and then tap
It takes several seconds to turn on the power to the wireless module and install the driver.
When both GPRS and 802.11b/g are enabled on battery power, the main battery charge will drop
down substantially.
Double-tap any of the following icons to access power management.
The icon indicates that GPRS Power is turned on.
The icon indicates that 802.11b/g Power is turned on.
Note: You may need to turn off the wireless power or simply stop the wireless signals at times, in
order to conserve battery power, or in situations where the use of radio is prohibited, such
as on airplanes, in hospitals, etc.
54
Reference Manual
on the taskbar to run Wireless Power Manager.
.
Advertisement
Table of Contents
