Table of Contents
Advertisement
9400CE Mobile Computer
Stop wireless connectivity, Bluetooth, 802.11b/g or GSM/GPRS that is not in use. Refer to the
Wireless Power Manager.
To save power, go to Start > Settings > Control Panel and select Display (for backlight
settings) or select Power (for power schemes).
Warning:
Using backlight, wireless connectivity, and peripherals while on battery power will
substantially reduce battery life.
START > SETTINGS > CONTROL PANEL AND DOUBLE-TAP THE POWER ICON
1) In the Battery tab (left below), you can always monitor the charging status.
2) Tap the Schemes tab (right above).
3) Select the desired power scheme and options for suspending operation when not in use. The
system can be set to three different states to conserve power:
User Idle state
System Idle state
Suspend state
The time choices represent the amount of time that must pass before the system will switch to
the next power conservation state.
START > SETTINGS > CONTROL PANEL AND DOUBLE-TAP THE DISPLAY ICON
To conserve more power, you may go to Start > Settings > Control Panel and double-tap the
Display icon to configure the backlight setting. Refer to section 1.4.1
10
Reference Manual
Adjusting the
Backlight.
Advertisement
Table of Contents
