Table of Contents
Advertisement
3) Press [Reset] +
4) Press
+
mode.
5) Seat 9400CE in the cradle.
6) Press
on 9400CE to start image update.
It will take approximately 5 minutes to update the image. A message will be displayed on the
mobile computer to indicate the OS update is completed successfully.
7) Wait a few seconds for a software reset that will be performed automatically.
8) Press [Reset] +
Warning:
Do not press any key on the mobile computer while updating OS image. Once the
OS update is completed, you cannot reload any older image.
to perform a hardware reset on 9400CE.
simultaneously in three seconds so that 9400CE can enter the "Download"
to perform a hardware reset on 9400CE again.
Chapter 2
Learning Windows CE Basics
37
Advertisement
Table of Contents
