Inserting The Minisd Card - CipherLab 9400CE Reference Manual

Table of Contents

9400CE Mobile Computer

START > SETTINGS > CONTROL PANEL AND DOUBLE-TAP THE STORAGE MANAGER ICON

Here provides a tool for administrators to reformat the DiskOnChip folder or storage card

(miniSD).

Warning:

This tool is for the use of system administrators only. Everything on the storage

device will be permanently erased after reformatting.

1.2.3 INSERTING THE MINISD CARD

If you wish to expand memory, follow these steps to insert a memory card into the miniSD card slot:

1) Press

for the mobile computer to enter suspend mode.

2) Place the mobile computer face down on a flat and clean surface.

3) Remove the side plate by unscrewing the two screws (on the right side when you place the

mobile computer face down) as shown below.

4) Insert the miniSD card properly.

5) Replace the side plate and tighten the screws.

Warning:

Make sure the mobile computer is set to Suspend mode; otherwise, it may cause

damage to the mobile computer.

Reference Manual

Table of Contents