CipherLab 9400CE Reference Manual page 105

UCC/EAN-128
ISBT 128
Industrial 25 (= Discrete 25)
Select Length
Interleaved 25
Convert to EAN-13
Verify Checksum
Transmit Checksum
Select Length
Code 39
Convert to Code 32
Code 32 Prefix
Verify Checksum
Transmit Checksum
Code 39 Full ASCII
Select Length
Trioptic Code 39
Read UCC/EAN-128 barcodes with leading FNC1
character.
Read ISBT 128 barcodes.
One or two fixed lengths
Range (1~55)
Convert a 14-character barcode into EAN-13 if the
following requirements are met:
The barcode must have a leading 0 and a valid EAN-13
check digit.
Decide whether to verify the checksum. If desired, select
one of the algorithms below. If the checksum is incorrect,
the barcode will not be accepted.
No
USS algorithm
OPCC algorithm
Decide whether to include the checksum in the data being
transmitted.
"Verify Checksum" must be enabled so that the
checksum can be left out (= "Transmit Checksum"
disabled).
One or two fixed lengths
Range (1~55)
Convert to Italian Pharmacode.
Prefix character "A" to Code 32 barcodes.
Decide whether to verify the checksum. If the checksum is
incorrect, the barcode will not be accepted.
Decide whether to include the checksum in the data being
transmitted.
"Verify Checksum" must be enabled so that the
checksum can be left out (= "Transmit Checksum"
disabled).
Code 39 Full ASCII includes all the alphanumeric and special
characters.
One or two fixed lengths
Range (1~55)
Appendix III 2D Scan Engine
Enable
Enable
Enable
4~55
Enable
No
No
No
4~55
Enable
No
No
No
No
Disable
4~55
Disable
95