Table of Contents
Advertisement
1.6.2 DIGITAL CAMERA
An integrated 2 mega-pixel CMOS camera inside the computer is specifically designed for collecting
image data. Refer to the Image Capture Utility.
1.7 COMMUNICATIONS
1.7.1 USING THE CRADLE
The cradle is designed for charging and communications at the same time.
1) Place the cradle on a flat and clean surface.
2) Connect the line of the power adaptor to the power jack on the back of the cradle.
3) Connect the power adaptor to a suitable power outlet.
4) The cradle is ready for charging.
5) Seat the mobile computer in the cradle.
If data communications are desired at the same time, you can establish a proper connection with
a computer or remote host. For example, you may establish a USB connection for ActiveSync.
Make sure that you have Microsoft ActiveSync installed on your computer before you connect
the USB cable from the cradle's USB device port (
Refer to section 2.3
Using
UNDERSTANDING THE STATUS INDICATORS
TASKS
Power ON
Charging Spare Battery
Charging Done
UNDERSTANDING THE COMMUNICATION PORTS
PORTS
USB Device Port
USB Host Port
ActiveSync.
GREEN LED
---
---
On
PURPOSE
This port is provided for connecting to your computer for
establishing a connection for ActiveSync.
This port is provided for connecting a USB device:
Keyboard
Mouse
Card reader
Storage device, such as a memory stick
Chapter 1
Using the 9400CE Mobile Computer
) to your computer.
RED LED
---
On
---
BLUE
On
---
---
19
Advertisement
Table of Contents
