Scan Engine; Reader Settings Table - CipherLab 9400CE Reference Manual

2D SCAN ENGINE
The tables below list reader settings as well as symbology settings for the 2D scan engine.

READER SETTINGS TABLE

2D
Focus Mode
Decode Illumination Decide whether to flash illumination on every barcode
AIM Pattern
Read Redundancy
Level 1
Level 2
Level 3
DESCRIPTION
Select the focus mode to control the working range:
Far Focus – optimized to read at its far position
Near Focus – optimized to read at its near position
Smart Focus – toggles the focus position after every
frame
capture to aid decoding.
Turn On (Internal LED )
Turn Off
Decide whether to project the aim pattern during barcode
capture.
Turn On
Turn Off
The following barcodes must be successfully read twice before being
decoded:
BARCODE TYPES
MSI
Codabar
Discrete 25 (=Industrial 25)
Interleaved 25
All barcodes must be successfully read twice before being decoded.
All barcodes except for the following barcodes must be successfully read
twice before being decoded.
BARCODE TYPES "EXCLUDED"
MSI
Codabar
Appendix III
CODE LENGTH
4 characters of less
8 characters of less
8 characters of less
8 characters of less
CODE LENGTH
4 characters of less
8 characters of less
DEFAULT
Far Focus
On
On
Level 2
93