Backup Utility; Managing The Registry - CipherLab 9400CE Reference Manual

9400CE Mobile Computer
When you seat the mobile computer in the cradle and connect it to your computer for the first
time, ActiveSync 3.7.1 will guide you through setting up a partnership between the mobile computer
and your desktop computer. Refer to ActiveSync with a Computer.
Select the check box of Inbox as shown above, and click [Settings] to configure it.
Note: ActiveSync 4.x does not support Inbox Synchronization. We recommend that you have
ActiveSync 3.7.1 installed on your computer.

4.5 BACKUP UTILITY

The CipherLab Backup Utility is provided to help you easily make copies of data and restore
your mobile computer's specific registry settings, install applications, user data, etc.
Find out your OS version: go to Start > Settings > Control Panel and select System. Select
the Device Name tab.
You may use the backups (.bkp) for these purposes:
Full Restore Operation
Backup all necessary files here (you don't have to select "Registry") so that you can restore your
mobile computer to an operational state following a disaster.
Partial Restore Operation
Backup a few specific files here so that you can restore small numbers of files after you have
deleted them by accident or found them corrupted.
Easy Cloning
Backup everything (including "Registry") necessary for cloning other 9400CE Mobile Computers.
Now go to Start > Programs > BackupUtility to open the CipherLab Backup Utility.

4.5.1 MANAGING THE REGISTRY

If you are using this backup utility for the first time, you must manually save the system registry to
the DiskOnChip folder first! Tap [Save] now to save the current system registry to
"\DiskOnChip\Sysbak\Registry.dat".
Warning: As long as you make any changes to the system configurations and settings, you must
tap [Save] to update the system registry here. Otherwise, it will reload the old
registry values in use after a cold boot.
If you wish to reset the current system configurations and settings to defaults, tap [Reset] to delete
the current system registry "\DiskOnChip\Sysbak\Registry.dat". It will then reload the default registry
values after a cold boot.
72
Reference Manual