CipherLab 9400CE Reference Manual page 51

Table of Contents

Advertisement

In the [Network and Dial-up Connections] window, you may configure settings for the
mobile computer connects to a network directly or through a modem. Alternatively,
you may tap Start > Settings > Network and Dial-up Connections.
USB Connection (via USB device port on the cradle)
GPRS (through a GPRS modem)
WLAN (via 802.11b/g)
BTPAN (via Bluetooth)
In the [Owner Properties] dialog box,
Identification/Notes tab: Type your contact information or notes.
Network ID tab: Type the user name, password, and domain name used to log on
to the remote network.
In the [Password Properties] dialog box, you may apply password protection to limit
access to the mobile computer.
In the [PC Connection Properties] dialog box, you may disable the direct connection
between the mobile computer and a desktop computer.
By default, the mobile computer is enabled to directly connect to a desktop
computer via the cradle's USB port. Alternatively, you may tap Start > Settings >
Network and Dial-up Connections and select USB Connection.
You may change to use Bluetooth if ActiveSync via Bluetooth has been enabled in
the Bluetooth Manager
In the [Power Properties] dialog box,
Battery tab: You may view the current status of main and backup batteries.
Schemes tab: You may configure the power scheme and switching.
Device Status tab: You may view the devices that are consuming power.
In the [Regional and Language Settings] dialog box,
Region tab: You may customize the appearance and formatting to your geographic
region.
Language tab: By default, it is set to English (United States).
Input tab: By default, it is set to English (United States)-US.
In the [Remove Programs] dialog box, you may remove any program that is installed
earlier.
In the [Storage Properties] dialog box,
Storage Manager tab: You may reformat the available storage device, either the
DiskOnChip folder or storage card. Actions include "Dismount the storage
device", "Format the storage device", and "Set up disk partitions". The Storage
Manager is for the use of system administrators only.
Chapter 3
Personalizing the 9400CE Mobile Computer
41

Advertisement

Table of Contents
loading

Table of Contents