Configuration And Calibration Overview; Screen Configuration And Calibration; Installing Software And Firmware; Designing The Screen Layout - Extron electronics TLP 710CV User Manual

Configuration
and Calibration
Overview
By now, the TLP 710CV must be installed in a suitable place, all necessary cables securely
attached, and the unit powered on. This section provides an overview of calibrating, designing
the screen layout, and adding functions to the touchscreen.

Screen Configuration and Calibration

1.
2.
3.
4.
5.
6.

Installing Software and Firmware

You will need to install GUI Configurator (version 1.3 or later), Global Configurator (version 3.3
or later), and Firmware Loader on your computer. These programs are available on the DVD
that ships with the TLP 710CV and from the
Firmware can be upgraded by downloading it to your PC from the
uploaded to the touchpanel using
pages
1.
2.
3.

Designing the Screen Layout

1.
2.

Linking Control Functions to Screen Objects

Use Global Configurator
functions to the on-screen objects.
Press the Menu button once. The
Adjust values as required.
Press the appropriate button on the edge of the screen to select the Main, Volume, Time,
Network, or Video menu and adjust the desired values from each menu.
Menu button a second time to open the calibration-screen.
Press the
Press the square that is colored green until it turns gray and the next square turns green.
When all four squares have been calibrated, the screen reopens to the
Press the Exit button to save changes and leave the menus.
for the touchpanel.
Extron website
Check the to see if the firmware for the TLP 710CV has been upgraded.
Download the latest version
Upload the firmware to the touchpanel by one of the available methods.
Use Extron GUI Configurator
that will appear on the TouchLink touchpanel (see the GUI Configurator help file for
further information).
Upload the graphical user interface
to associate the touchpanel with an IP Link controller and to assign
TLP 710CV • Calibration and Configuration Overview
Main screen opens.
Extron website.
Firmware Loader, GUI Configurator, or the
to your PC and note the folder where it is saved.
(version 1.3 or later) to design the graphical user interface
to the touchpanel.
Main screen.
Extron website. It can be
Web Control
17