Where To Position The Operator - Centurion R3 Installation Manual

Where to Position the Operator

Where to Position the Operator
BE SURE TO USE A 'LONG' CONNECTING ARM
FOR THIS INSTALLATION TYPE.
b
Gate Opening Gate Centre to
Angle (Degrees) Pedestal Centre
60 350 to 610 (370)
70 320 to 600 (340)
80 240 to 530 (260)
90 200 to 450 (220)
100 210 to 400 (230)
110 250 to 440 (330)
120 280 to 440 (300)
Ensure that the gate does not exceed the relevant specifications on page 9.
Recommended values are shown in bold type.
All dimensions shown are indicated in millimetres.
All recommended values will result in gates with similar opening times.
Figure 7 Pedestal Positioning for Standard Installations
PEDESTAL POSITIONING FOR
STANDARD INSTALLATION
(SMOOTHEST MOVEMENT, BEST LOCKING)
#
A B
Hinge Centre to
Pedestal Centre
550 to 790 (750)
550 to 790 (750)
550 to 790 (750)
550 to 740 (700)
500 to 740 (700)
450 to 640 (600)
300 to 490 (450)
GATE LEAF IN CLOSED POSITION
b
o
120
110
C E
Hinge Centre to Pedestal to
Gate Bracket edge of motor
650 to 700 (700) 224
650 to 700 (700) 191
650 to 700 (700) 153
650 to 700 (700) 110
600 to 650 (650) 122
500 to 610 (610) 130
500 to 570 (570) 130
Page 16
C
Gate opening angle
o
o
o 70
o
o
100
80
90
© Centurion Systems (Pty) Ltd.
o
0
o
60