Operator Installation - Centurion Vector2 Installation Manual

9. Operator installation

To simplify the installation process, it is recommended that the existing gate is
removed from the pillar before proceeding.
1. Determine gate opening angle and direction
of operator (inward or outward).
Alternatively the swing angle can be
determined more accurately with the
process detailed on page 33
2. Determine a suitable height for the wall
bracket.
The gate bracket must fit to a sturdy
point on the gate.
Consider using the optional gate
adaptor kit
Take care to make sure the operator
is mounted level
3. Determine where to put the bracket
according to A and B values in the tables on
pages 28, 29, 31 and 32.
Operator must not
foul against bracket
Use Mechano kit
Page 23
120°
70°
110°
100°
90° 80°
FIGURE 27. ESTIMATE SWING ANGLE
FIGURE 28. GATE HEIGHT
A
B
FIGURE 29. BRACKET POSITION
Or
Cut the bracket
Take care to shorten
the wall bracket to prevent
interference with the
operator
FIGURE 30. BRACKET POSITION
Closed
60°
Estimate
swing angle
Gate Bracket
Gate opening angle 0°
120° 60°
100° 70°
110° 90° 80°
Gate opening angle 0°
120° 60°
100° 70°
110° 90° 80°