Operator Installation
Operator Installation
1. Determine gate opening angle and direction of
operator (inward or outward).
Alternatively the swing angle can be deter-
mined more accurately with the process
detailed on page 45.
2. Determine a suitable height for the wall
bracket.
The gate bracket must fit to a sturdy point on
the gate.
Consider using the optional gate adaptor kit.
Take care to make sure the operator is
mounted level.
3. Determine where to put the bracket according
to A and B values in the tables on pages 23 and
25.
.
OPERATOR MUST NOT FOUL AGAINST BRACKET
Take care to shorten
the wall bracket to
prevent interference
with the operator
CAUTION:
USE MECHANO KIT
120°
110°
100°
A
B
or
or
Page 18
CLOSED
60°
70°
90° 80°
Gate Bracket
For tables see page 23 or 25
CUT THE BRACKET
Gate opening angle
0°
120°
60°
100°
70°
110°
90° 80°
0°
Gate opening angle
120°
60°
100°
110°
90° 80°
70°