Specifications; D3/D5/A5/ Operator; A10 Operator - Centurion D3 User Manual

Specifications

CENTURION D3, D5 & A5
TECHNICAL DATA
POWER SUPPLY
MAXIMUM ABSORBED CURRENT
MOTOR VOLTAGE
STARTING THRUST
RATED THRUST
GATE SPEED (NOMINAL)
DUTY CYCLE AT RATED THRUST
OPERATING TEMPERATURE RANGE
ANTI-CRUSHING SENSING
MASS OF UNIT
MAXIMUM GATE LENGTH
MAXIMUM GATE WEIGHT
1. - Other voltage options available; 2. - Alternative source of supply is a solar charger; 3. - An operating speed of 12m/mm is
available using a 20 tooth pinion, maximum gate mass 1000kg - single phase unit only; 4. - Unit fitted with PSU (40% PSU fan
cooled).
CENTURION A10
SPECIFICATIONS
Power Supply
Maximum Absorbed Current
Motor Voltage
Output Pinion
Starting Thrust
Rated Thrust
Operating Speed @ Rated Thrust
Motor Cooling
1
Duty Cycle (continuous)
Duty Cycle (1/2hr endurance)
Ambient Temperature Range
Anti-crushing sensing
Motor Thermal Protection
Maximum Gate length
IP Rating
Optional Battery Back-up
Shipping Mass of Unit
Maximum Gate Mass
O
(1) At rated thrust and 25 C maximum ambient temperature, unit in full shade.
(2) Refer to RATED THRUST values.
24 - Centurion Sliding Gate Operators User Guide
D3 / D5
220V, +/-10%, 50Hz²
160mA battery charger
12V DC
35/60kgF
12/20kgF
15/16m/min
20/50% (at thrust less than 10kgF)
-10 +50 °C
ELECTRONIC
12/13.8kg (incl. battery)
11m
300/500kg
A10 BASIC
220V +/- 10%, 50Hz - 1 Phase
6A
220V 3 Phase
20 Tooth Mod 4
40kgF* 30kgF**
30kgF* 22.5KgF**
2
16m/min Adj. Up to 30m/min
Direct Drive Fan (1400RPM)
45%
1
65%
O O
-20 C to +50 C
Electronic
Electronic
20m
44
Yes
15.5kg
1 000kg* 600kg**
4
A10 ENDURANCE
220V +/- 10%, 50Hz - 1 Phase
6A
220V 3 Phase
20 Tooth Mod 4
40kgF* 30kgF**
30kgF* 22.5KgF**
2
16m/min Adj. Up to 30m/min
High Efficiency Fan (2300 RPM) High Efficiency Fan (2300 RPM)
90%
95%
O
-20 C to +50 C
Electronic
Electronic
20m
44
Yes
15.7kg
1 000kg* 600kg**
A5
220V, +/-10%, 50Hz²
A
220V AC
25kgF
50kgF
16m/min
20% (70% Fan)
-15 +50 °C
MECHANICAL / ELECTRONIC
13.2kg
11m
500kg
A10 HEAVY WEIGHT
220V +/- 10%, 50Hz - 1 Phase
6A
220V 3 Phase
17 Tooth Mod 4
47kgF
35kgF
13.6m/min
90%
95%
O O
-20 C to +50 C
Electronic
Electronic
17m
44
Yes
15.6kg
2 000kg
O