Optional Modules; Accessories; 1: Pk-Plus Programming Utility; 2: Dress Panel - Fire-Lite MS-9200UD User Manual

Optional Modules

1.7 Optional Modules

1.8 Accessories

MS-9200UD PN 51906:A 12/10/02
The MS-9200UD main circuit board includes option module connectors for the
following module:
4XTMF Transmitter Module
The 4XTMF provides a supervised output for local energy municipal box transmitter,
alarm and trouble reverse polarity. It includes a disable switch and disable trouble
LED. A jumper on the module is used to select an option which allows the reverse
polarity circuit to open with a system trouble condition if no alarm condition exists.
The module plugs into connectors J5 and J6 which are located near the right edge the
main circuit board. When the 4XTMF module is installed, Jumper JP3, on the main
circuit board, must be cut to allow supervision of the module.
1.8.1 PK-Plus Programming Utility
The PK-Plus Programming Utility can be used to program an MS-9200UD directly
from most IBM compatible computers, including laptops and portables, equipped with
a serial port. MS-9200UD program files can also be created and stored on the PC and
then downloaded to the control panel. The PK-Plus Kit includes the MS-9200UD
Windows-based Programming Utility software on CD-ROM with on-line help file. A
serial cable (P/N: PRT/PK-CABLE), which must be purchased separately, is required
for connection of the PC to the RS-232 (PC/Printer) terminals at TB8 of the MS-
9200UD main circuit board. Refer to the illustration on page 10 and the section titled
"Printer/PC" on page 40, for the location and connections to this terminal.
1.8.2 Dress Panel
An optional dress panel is available for the MS-9200UD. The dress panel restricts
access to the system wiring while allowing access to the key panel.
CAUTION: HIGH VOLTAGE UNDER PANEL
!! WARNING !!
SEVERAL DIFFERENT SOURCES OF POWER
CAN BE CONNECTED TO THIS CONTROL UNIT
DISCONNECT ALL SOURCES OF POWER BEFORE SERVICING
Product Description
21