Downloading Initiated At Control Panel; Downloading Initiated At A Service Terminal - Fire-Lite MS-9200UD User Manual

Remote Site Upload/Download

6.2 Downloading Initiated at Control Panel

6.3 Downloading Initiated at a Service Terminal

162
Before initiating the download procedure, make certain that the control panel is:
✓ In Normal Mode
✓ Central Station communications are off
✓ The communicator is in the standby state (red phone line active LEDs are off
and Kissoff LEDs are off)
Place the control panel into Program Mode and program one or both of the Service
Terminal phone numbers. It is also advisable at this time to program the Panel
Identification Number. This will allow the Service Terminal to easily identify incoming
calls.
Program the control panel for download operation. The control panel will now call the
appropriate Service Terminal phone number and the downloading process will begin.
Once the called Service Terminal identifies the incoming call (control panel), the
downloading process is allowed to continue. Downloading progresses until all
programmed information has been successfully loaded into the control panel.
Before initiating the download procedure, make certain that the control panel is:
✓ In Normal Mode
✓ Central Station communications are off
✓ The communicator is in the standby state (red phone line active LEDs are off
and Kissoff LEDs are off)
Once the control panel accepts/answers an incoming call, the panel will:
1. Establish basic modem connection
2. Verify secret code and panel identification number
3. Verify callback vs. no callback request from the service terminal. If callback is
requested, steps 4 through 9 will occur. If no callback is requested, only steps 8
and 9 will occur
4. Identify the Service Terminal location
5. Hang-up/disconnect call
6. Call the Central Station(s) and transmit a request for upload/download message
(if programmed to do so). If this message is accepted, the control panel will
proceed to the next step
7. Return call to Service Terminal
8. After security clearance, begin downloading
9. Upon completion of download, call Central Station(s) back and report either a
successful download or failed upload/download message (if programmed to do
so)
Downloading Initiated at Control Panel
MS-9200UD PN 51906:A 12/10/02