Transmittal Priorities - Fire-Lite MS-9200UD User Manual

Transmittal Priorities

5.1 Transmittal Priorities
MS-9200UD PN 51906:A 12/10/02
The integral communicator transmits highest priority events first. Events, in terms of
priority, are listed below in descending order:
1. Alarms (highest priority level)
✓ Pull stations
✓ Waterflow
✓ Smoke detector
✓ Other alarm types
2. Supervisory Zone
3. System Troubles
✓ Zone disabled
✓ Fire drill
✓ AC fail (after delay)
✓ Zonal faults
✓ Earth fault
✓ Low battery
✓ Telephone line fault
✓ Notification Appliance Circuits fault
✓ Communication trouble
✓ Annunciator trouble
✓ System off normal
4. Restoral Reports
✓ Zone alarm
✓ Supervisory
✓ Zone(s) enabled
✓ Fire drill
✓ AC
✓ Zone fault
✓ Earth
✓ Battery
✓ Telephone line
✓ Notification Appliance Circuits
✓ Communication
✓ Annunciator trouble
✓ System off normal
5. 24 Hour Test (lowest priority)
Red LEDs are provided on the circuit board to identify which telephone line is
activated. Also, a green LED labeled Kissoff will turn on whenever the control panel
has successfully transmitted reports to the Central Station. The Kissoff LED may turn
on several times during communications with a Central Station.
Central Station Communications
157