Release Notes - CipherLab Cobia User Manual

RELEASE NOTES

Version Date
1.00 Mar. 13, 2017
Notes

Modified: 1504B models added (based on 1504 Series User Guide)
 Modified: Symbologies Supported – same 1D symbologies as
1500P
 Modified: Symbology Supported – Code 11 added
 Removed: 1.6.1 Test Modes
 Modified: 1.9 – Three times redundancy read barcode added
 Modified: 1.10 – Addon Security level 2~30; default 2
 Modified: 1.11 – behavior of 1504B same as 1504A
 Removed: 1.12 Negative Barcodes
 Removed: 1.16 Illumination Brightness
 Modified: 3.1 ~ 3.19 – same 1D symbologies as 1500P
 Modified: 3.1.1 – set "Normal" (Codebar security level) to default
 New: 3.1.5 Code Length Qualification – (Codebar)
 Modified: 3.5.5 – set "Normal" (Code 39 security level) to default
 New: 3.5.6 Asterisks as Data Characters
 New: 3.5.7 Code Length Qualification – (Code 39)
 New: 3.6.1 Code Length Qualification – (Code 93)
 Modified: 3.7.1 – set "Normal" (Code 128 security level) to default
 New: 3.9.1 EAN-13 Addon Modes
 Modified: 3.9.4 – set "Normal" (EAN-13 security level) to default
 Modified: 3.11.1 – ISBT concatenation default is disabled
Modified: 3.16.8 – set "Normal" (GS1 DataBar security level) to

default
 New: 3.20 Code 11
 Modified: 3.21 – Maxicode, Aztec removed
 Modified: 3.21.3 – GS1 formatting removed
 Modified: 3.21.3 – Data Matrix Inverse added
 Modified: 3.21.4 – GS1 formatting removed
 Modified: 3.21.4 – QR Code Mirror/Inverse added
 Modified: 3.21.5 – MicroQR default is disabled
 Removed: 3.22 Macro PDF
 Modified: 4.2.2 – same 1D symbologies as 1500P
 Modified: 4.2.2 – Code 11 added
 Modified: 4.4.1 – same 1D symbologies as 1500P
 Modified: 4.4.1 Select Pre-defined Code ID – AIM Code ID added
 Modified: 4.4.2 – same 1D symbologies as 1500P
 Modified: 4.4.2 Change Code ID – Code 11 added