System Number Selection; Convert To Upc-A - CipherLab 1663 User Manual

4.19.1 SYSTEM NUMBER SELECTION

Decide whether to decode the ordinary UPC-E barcodes only or both UPC-E0 and UPC-E1
barcodes.
System number
System number
Warning: Because of the way system number 1 is encoded, if both system numbers
are enabled, the user might suffer from short scanning UPC-A or EAN-13
barcodes into UPC-E1 barcodes.

4.19.2 CONVERT TO UPC-A

Decide whether to expand the read UPC-E barcode, as well as its addons, into UPC-A.
After conversion, the data follows UPC-A format and is affected by UPC-A
programming selections (e.g. System Number, Check Digit).
enabled for decoding UPC-E0 barcodes.
0
enabled for decoding UPC-E1 barcodes.
1
Chapter 4
System Number 0 & 1
*System Number 0 Only
Convert UPC-E to
UPC-A
*Do Not Convert
Update
Change Symbology Settings
147