Host Requirements; Communications Boundaries - Intermec 3440 User Manual

3440 Bar Code Label Printer User's Manual

Host Requirements

The 3440 printer has the following hardware and software requirements:
• The host computer must use the American Standard Code for
• A serial port must be available on the host if you are connecting directly
• The host must support at least one of the following data communications
For information on configuring the host computer, port concentrator, or
network controller, see the reference manual for the controlling device.

Communications Boundaries

The information below applies to all protocols that the printer supports.
Parameter
Message delay
Character delay
Message block size
Device address number
(Multi-Drop only)
B-8
Information Exchange (ASCII) for data communications.
to the printer.
interfaces: RS-232, RS-422, or RS-485.
Maximum Capacity
9999 milliseconds
9999 milliseconds
255 characters (including STX and ETX characters)
Unlimited block size for XON/XOFF
A to Z, 0 to 5
FG 9pt Italic
FG 8pt Italic