1233*
FranklinGothic Helv Condensed
Loading Media for Fanfold Printing
Use the sample of fanfold media provided in the Media Envelope to
complete the following procedures. In fanfold printing, you place a stack of
fanfold media at the rear of the printer and feed it into the printer through a
slot in the rear cover.
Note: If you want to load rolls of media (instead of fanfold), see "Loading Media
into the Printer" in Chapter 2.
To load media for fanfold printing
1. Open the printer.
2. Rotate the head lift lever clockwise to release the printhead.
3. Turn the supply roll retainer counterclockwise and slide it to the outer
end of the supply roll post. Turn it clockwise to lock it in place.
Head lift
lever
Lower
media guide
Edge
guide
Supply
roll
post
Supply
roll
retainer
1
Getting Started
Media access
slot
Fanfold
media
3440U.006
1-7