Connecting The 3440 To A Network - Intermec 3440 User Manual

3440 Bar Code Label Printer User's Manual
To connect your printer to a PC with a modem
1. Connect the printer serial port to a modem using a 25-pin to 25-pin
2. Connect a second modem to the host computer using an appropriate
3. Connect the two modems together using an acoustic coupler or a direct
4. If necessary, change the printer's serial port configuration by following

Connecting the 3440 to a Network

You can connect the 3440 printer to Novell NetWare networks, Token Ring
networks, or other TCP/IP networks. To connect the 3440 printer to a
network, you must have:
•
•
If you did not have the parallel interface installed at the factory, you can
install the field installable option (Intermec Part No. 056830) in the optional
I/O board port of your printer.
1-16
1233*
RS-232 modem cable assembly (Intermec Part No. 043237S).
cable assembly for the host and modem.
connection to telephone communications lines.
the instructions in "Configuring the Serial Port for Communications"
later in this chapter.
a Centronics parallel interface installed in your printer.
a network interface adapter (for example, Ethernet).
FranklinGothic Helv Condensed