Optimizing Image Bands For Batch Printing - Intermec 3440 User Manual

3440 Bar Code Label Printer User's Manual

Optimizing Image Bands for Batch Printing

If you frequently print batches of identical labels (using the <US>
command) or print a quantity of identical labels, you may want to optimize
the number of image bands for batch printing. This optimization is
especially helpful if you experience delays between the printing of each
label.
To optimize the number of image bands for batch printing, you must select
enough image memory to allow the printer to retain the entire label image.
To optimize batch printing, select the number of image bands (1 band =
1 inch) to equal the label size. Therefore, if the printed image stops at a
distance of 4 inches from the beginning of the label, you must select four
image bands to prevent reimaging if the label is 5 inches long.
7-14
1233*
FranklinGothic Helv Cond