Top Vent Or Rear Vent Configuration; Converting The Fireplace To Top Vent Configuration - Travis Industries 864TRV Installation Manual

8

Top Vent or Rear Vent Configuration

This appliance is shipped in the rear vent configuration. To change to the top vent configuration,
follow the directions below.
NOTE: the vent configuration affects several aspects of installation (framing, maximum vent rise,
maximum vent run). When reviewing the installation requirements make sure to pay attention to the
type of configuration being used.
Converting the
Fireplace to Top Vent
Configuration
Travis Industries
Installation
(for qualified installers only)
Remove the 4 screws
securing the cover plate.
Remove it and place it
aside.
Remove the 4 screws
securing the intake cover
plate. Remove it and place it
aside.
Remove and discard all of
the insulation found near
the flue assembly (make
sure to remove every
piece).
4050714
Remove the 4 screws
securing the cover plate (with
hole).
This part may be discarded.
100-01173_001