56
Optional Equipment
Fireback Installation
WARNING Turn off gas to the appliance and make sure it has fully cooled prior to conducting service.
1
Remove the glass frame and logs.
2
Remove the front and rear burners
(see page 52).
3
Remove and discard the hearth
plate.
4
Install the firebacks following the
directions below.
Remove the screws and
a
clips on both sides.
d
Place the floor
firebacks in place.
5
Restore the fireplace to the correct configuration.
Travis Industries
(for qualified installers only)
Hearth Plate
Place the rear fireback in in place. The
b
side fireback holds the rear fireback in
place - hold the rear fireback while
installing the side fireback.
4050714
Place the side firebacks
c
in place. Secure using
the screws and clips
removed in step "a".
100-01173_001