Facing Overview; Optional Faceplates - Sizing Chart - Travis Industries 864TRV Installation Manual

Facing Overview

Upgrade faces are available for this fireplace and may influence facing installation. Consult with your
Travis Dealer if you are using an upgrade face.
Optional non-combustible facing may be installed on the fireplace. Use the guidelines below to
determine the location (also see the following pages for detailed diagrams.
Tile Line Any non-combustible facing under 1" thick (see "Thin Facing" on page 34).
Masonry Line Any non-combustible over 1" thick (see "Thick Facing" on page 36).
Hearth Line Non-combustible hearth/facing should be installed up to this location (1" above the base
of the fireplace). The fireplace may be raised to accommodate thicker hearth materials.
Optional Faceplates – Sizing Chart
Name
FPX Artisan, Classic, Fr Ctry
Winthrop Victorian Lace
Wilmington Hearthview
Winthrop Bungalow
© Travis Industries
Installation
(for qualified installers only)
Height Width
35-3/4" 41"
34-1/8" 36-7/8"
35-3/4" 41"
34" 36-7/8"
NOTE: The hearth or facing can extend no
greater than 1" above the base of the fireplace.
The fireplace may be raised to accommodate
thicker hearth materials.
Notes
45-3/4" Radius – May fit over top of tile facing
Optional facing will butte to edge of faceplate (tile line)
May fit over top of tile facing
Optional facing will butte to edge of faceplate (tile line)
4050714
33
100-01173_001