Travis Industries 864TRV Installation Manual page 65

Optional Equipment
Install the air duct. Each section, when joined, must be attached with three screws and aluminum
duct tape (U.L. 181A-P or equivalent). Secure the duct if it is in an area where it may sag or
become dislodged.
NOTE: The air duct has a 0" clearance to combustibles.
Attach the grill (and wall adapter, if necessary).
Screws
(included with
this kit)
© Travis Industries
Phillips
Screwdriver
(for qualified installers only)
Wall Adapter
(for use when the blower box
protrudes from the wall -
Grill
primarily on 2 x 4 walls)
4050714
Secure all ducting
together with screws.
Then seal the seams
with aluminum duct
tape (U.L. 181A-P or
equivalent).
100-01173_001
65