Glass Frame Removal And Installation - Travis Industries 864TRV Installation Manual

Finalizing the Installation

Glass Frame Removal and Installation

Warning: The appliance must be completely cool before removing the glass.
Warning: Do not strike or slam the glass.
Based upon the face being used, either:
a
(a) swing the access door down and remove the top grill,
(b) remove the face (unscrew or lift off - see the
instructions included with the face for details).
Open the six latches holding the glass frame in place
(start with the bottom three) - follow the directions shown
to the right.
Lift the glass frame up and
b
pull it forward to remove.
Re-Attaching the Glass Frame:
a) Hang the glass frame on the firebox.
b) While holding in place, attach the upper latches
(follow the instructions to the right in reverse).
c) Lift the glass frame slightly and attach the lower latches.
NOTE: Make sure the glass frame is all the way in place - it
should be flush with the front of the fireplace when installed.
© Travis Industries
(for qualified installers only)
NOTE:
You may need to lift
the glass frame
while re-attaching.
4050714
Top of
Firebox
Latch
Catch
(on glass frame)
45
Glass
100-01173_001