Main Monitor Output Select; Simultaneous Output; Monitor Brightness - Ness Premium H.264 DVR Setup Manual

User's Manual
< Main Monitor Output Select >
Users can select to connect <BNC> or <VGA> main monitor. Alternatively, select <AUTO>
to let the DVR automatically detects the connection. Under normal condition, BNC and VGA
main monitor cannot coexist at the same time. Thus when BNC and VGA are both
connected, only the first connected monitor (BNC or VGA) will work. The active connection
can switch from BNC to VGA and vice versa.
< Simultaneous Output >
For users who wish to show BNC and VGA main monitors at the same time, set
Simultaneous Output to <Yes> to switch off the VGA1 connector. The items will be slightly
changed as the following:
1. Show Camera Title
2. Title Position

3. Simultaneous Output

4. Monitor Brightness

5. Monitor Contrast
6. Monitor Chrominance
7. Screen Center Adjust
8. VGA Resolution
9. VGA Frequency
10. Show Color Bar
NOTE: Main Monitor Output Select and 2nd VGA Frequency will disappear; Monitor
Brightness, Contrast, and Chrominance will become unavailable; and a new item
VGA Resolution will show up.
NOTE: If users change the resolution to 1024x768 or 1280x1024, the BNC (and
S-Video) output will be switch off.
< Monitor Brightness >
The function allows users to adjust the brightness of the monitor. Move the cursor to the
item then press ENTER, and use UP / DOWN keys to adjust the numeric value. The range
of brightness values is <-32> to <31>.
43
Monitor Setup
Yes
Fit VGA
Yes
0
0
0
800*600
60Hz
Execute