Configuration; Load Factory Default; Import Configuration - Ness Premium H.264 DVR Setup Manual

Table of Contents

User's Manual

Configuration

The Configuration menu can be used to restore the default factory settings, import and

export configuration. Select <Configuration> from the Main menu and press ENTER. The

following menu is displayed. Items in this menu are described in the following subsections.

2. Import Config

3. Export Config

< Load Factory Default >

This item is used to load the factory setting. Select <Yes> to recall the factory default setup

configuration from the read-only memory, or <No> to cancel.

< Import Configuration >

This item allows users to load a unit configuration that was saved in an external drive. To

import a configuration that was previously exported, make sure the device that saved the

configuration is connected to the unit. Select <Import Config> from the Configuration menu

and press ENTER. The following menu is displayed.

Config Name

xxxx-xxxx

xxx-xx

Press UP / DOWN to select one of the listed available configuration files, and choose

<Yes> to start import.

NOTE: If the imported configuration has different record mode from the unit's, the

warning message "This config has different record mode. This will FORMAT ALL

HARDDISKS." will show.

NOTE: Remove the ThumbDrive

restarts, or it will be formatted as well.

Configuration

Import Config

used for importing configuration after the unit

Select

Table of Contents