Main Monitor - Ness IQ-SDI-4 User Manual

dropped out and invisible on the monitor.
Adjust Horizontal to change margin between both ends of the monitor on horizontal side and OSD. Margin range is between
0 and 50, with a larger number representing greater margin.
Adjust Vertical to change margin between both ends of the monitor on vert 130.
Vertical side and OSD Margin range is between 0 and 50, with a larger number representing greater margin.
While pressing (+) or (-) button, a target value increases or decreases by 10 units.
De-Interlace
This function changes playback display into Progressive Scan or Interlace Scan. Check ( ) De-Interlace, then frame will
display as the Progressive Scan and shows the better picture quality.
4.3.2

Main Monitor

Please click ( ) DISPLAY>Main Monitor
The Main Monitor menu will allow user to adjust channel sequencing interval of Main monitor.
Full Seq
Adjust interval for 'Full screen sequencing'.
Check check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
Quad Seq
Use only with 8 / 16 channel DVRs.
Adjust interval for 'X4 Split Screen sequencing'.
Check check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
'4 Split Screen sequencing' is disabled in the following modes.
- 8 channel DVR: 3x3 Mode
- 16 channel DVR: 4x4 Mode
X9 Seq
Use only with 16 channel DVR.
Adjust interval for 'X9 Split Screen sequencing'.
Check check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60 seconds
by each press.
'9 Split Screen sequencing' is disabled in 4X4 Mode.
Ness IQ-SDI Users Manual
and the following screen will appear.
31 | P a g e