Table of Contents
Advertisement
User's Manual
Inside The Range:
The value of transaction within a certain range will be marked as an exception.
The range needs to be configured through the following sub-settings <Value>
and <Value (Upper Limit)>.
Outside the Range:
The value of transaction outside a certain range will be marked as an
exception. The range need to be configured through the following
sub-settings <Value> and <Value (Upper Limit)>.
< Input Setup >
This item is used to choose the connection method between your Text Device and the DVR.
Also some relative settings of the connection method can be configured.
1. Port Selection
2. Input Source
3. Camera Selection
4. Text Filter
5. Manual Filter Setup
6. Input Process
7. Text Baud Rate
8. Text Bits
9. Text Stop
10. Text Parity
Port Selection
It is essential to select a port for either the POS/cash register or modem when
the text function is set on. Meanwhile, also check whether the device is
connected to the port selected.
1. Serial Port
2. USB Port-Front
3. USB Port-Rear Top
4. USB Port-Rear Bottom
79
NOTE: Transactions will only be marked as exceptions in the text
database after "Exception String" and "By Numerals" are set AND
"Trigger" is <ON>. The data that has been stored before won't be
marked as exceptions.
Port Selection
Input Setup
Direct Connected
Serial Port
1
ASCII
Canonical
9600
8
1
None
Text
None
None
None
Advertisement
Table of Contents
