Table of Contents
Advertisement
PIN Code Setup
You can enter the PIN code which has been set for protecting your mobile
phone.
Receiver Number
You can enter the number of the assigned mobile phone, which the short
message will be sent to.
Send Test Message
Select this item to send a test message to see if the setup is successful.
Port Selection
The Port Selection enables the user to assign <Dial-In/Out>, <SMS>, or
<Text> to the designated port of the DVR. For instance, when the cable of a
POS system is inserted to the Serial Port of the DVR, enter the Port Selection
menu and assign <Text> to the Serial Port. Then the DVR will now be able
to obtain data from the POS system.
< Alert Notification Setup >
This function allows the user to send alert notifications to the CMS program which had been
installed to your computer. For detailed setup instruction, please refer to the CMS user's
manual.
Alert Configuration Set
<Alert Configuration Set> provides 3 combinations of Alert Notification, IP,
and Port.
1. Serial Port
2. USB Port-Front
3. USB Port-Rear Top
4. USB Port-Rear Bottom
Alert Notification Setup
1. Alert Configuration Set
2. Alert Notification
3. Alert IP
4. Alert Port
5. Alive Interval
Port Selection
User's Manual
Text
None
None
None
1
OFF
0.0.0.0
9999
120sec
64
Advertisement
Table of Contents
