Select Hdd & Range Dialog Box - Ness PowerPlex EDR400 Instruction Manual

9.1 Select HDD & Range Dialog Box
Search by location
The following is a brief description for each item shown above.
Administrator's Guide and Operating Instructions
When the user click on the Select HDD & Range icon on the
Playback Panel, the Select HDD & Range dialog box will be shown
on the screen. The system provides user to search the image either by
HDD location or by time. Use the Down arrow of the upper left
column in the diagram box to select the desired searching way.
To search by location, the diagram will be shown as below.
V
01
01
01
01
N Y N N N Y Y N N N Y Y N N N N
N Y N N N Y Y N N N Y Y N N N N
01
01
N Y N N N Y Y N N N Y Y N N N N
01
N Y N N N Y Y N
HDD No – The recorded Hard Disk to playback.
Start/End Block No – 1 GB/Block or 32 Sections/Block for the
system. The maximum End Block No. represents the Block number
for the last recorded video or the maximum block number for the
Hard Disk. Use the Down arrow button to select the Start/End
Block No.
Options to Play – To playback all recorded video images, or to
playback only motion or alarm detected video images of the assigned
location.
01-01-01
2001/8/13 Mon, 18:46:50
50