1
.
5
M
o
n
i
t
o
r
D
i
1
.
5
M
o
n
i
t
o
r
D
i
The status information of the cameras or machine will show up, and be located at different places
on the screen.
Channel tag: A channel tag indicates the channel name of the screen.
1
Event sign: Event signals which are small icons with a capital letter and red background show
2
the events on each screen. There are totally 6 different signals which are:
A
Alarm event. The alarm place where the camera locates. In order to show the camera video to
a corresponding alarm, setting a FOCUS CAMERA in ALARM SETUP MENU is necessary.
M
Motion event. Motion event only shows up when the camera's MOTION is enabled in
MOTION SETUP MENU, and the camera detects a motion.
V
Video loss event. Video loss event only shows when the camera's VLOSS is enabled in
VLOSS SETUP MENU, and the camera signal is lost.
S
Sequence sign. Sequence sign shows up when the display is in the sequence mode.
The sequence display is located on display with a " " sign in the last display of the screen.
The
sign will replace " " sign in the display when sequence occurs.
S
Note: Sequence mode is unavailable only in 16-displays mode.
s
p
l
a
y
s
p
l
a
y
1. Channel tag
2. Event sign
3. Select sign
2. Event sign
4. Play status bar
5. Record status bar
10