Table of Contents
Advertisement
Active
The item indicates if the storage device is added to the database or not.
<Yes> means the device has been added into database.
Action
The item allows users to add the storage device to the database or remove
the device from the database.
The options are <None> (no action), <Add> (add the selected device to the
database), <Remove> (remove the selected device from the database),
<Recover> (repair the selected device), and <Format> (format the selected
device).
< NAS Devices >
The DVR can connect Network Attached Storage (NAS) devices to expand the size of the
database. Before connecting the NAS device, the DVR has to be shut down. After the NAS
device is connected and the DVR is rebooted, access <Database Setup>
Devices> and the menu will be displayed as below. The items <Active> and <Action> is the
same as in Internal / External Disks menu.
Device Name
xxxxxxxxxxx
Detail
Set this item to <Yes> and the detailed information of the NAS device will be
shown on the monitor. Refer to the following for an example. The information
is "read only".
NOTE: Before removing external devices from the unit, remember to
remove the devices from the database first.
NAS Devices
NAS Detailed Info
Device Name: xxxxxxxxxxx
IP: 192.168.50.2
Netmask: 255.255.255.0
Storage Status
Index
Status
Active
Detail
Yes
Yes
Port: 8080
Free Size
User's Manual
Action
None
Total Size
<NAS
70
Advertisement
Table of Contents
