Monitor Setup; Show Camera Title; Title Position - Ness Premium H.264 DVR Setup Manual

Monitor Setup

The DVR supports dual main monitor output. To configure the monitor settings, select
<Monitor Setup> from the Main menu and press ENTER. The following menu is displayed.

1. Show Camera Title

2. Title Position

3. Main Monitor Output Select
4. Simultaneous Output
5. Monitor Brightness
6. Monitor Contrast
7. Monitor Chrominance
8. Screen Center Adjust
9. VGA Frequency
10. 2nd VGA Frequency
11. Show Color Bar
< Show Camera Title >
This item allows users to choose whether to display the camera title on the screen or not.
The default is <YES>, which displays the camera titles with the video.
< Title Position>
This item allows the DVR to display the proper screen size on either a PC Monitor (VGA) or
a CRT CCTV Monitor (BNC). For instance, if you are using a CRT CCTV monitor, set this
item to <Fit BNC>; or set this item to <Fit VGA> for PC monitor.
CH1 CH2
CH5 CH6
CH9 CH10
CH13 CH14
<Wrong Setting>
PC Monitor is used in the example above. In the <Wrong Setting>, the Title Position is set
to <Fit BNC> instead of <Fit VGA>. Since it is not the right setting, the titles of CH1, CH5,
CH9, and CH13 are slightly shifted toward the center screen of each channel. After
switching to <Fit VGA>, the titles have been shifted back to the proper position as shown in
the <Correct Setting>.
Monitor Setup
CH3 CH4
CH7 CH8
After switching to
CH11 CH12
<Fit VGA> mode.
CH15 CH16
Yes
Fit VGA
AUTO
No
0
0
0
60Hz
60Hz
Execute
CH1 CH2 CH3
CH5 CH6 CH7
CH9 CH10 CH11
CH13 CH14 CH15
<Correct Setting>
User's Manual
CH4
CH8
CH12
CH16
42