Operating Mode; Choose A Wireless Network - Ness Premium H.264 DVR Setup Manual

- Operating Mode

Devices in a wireless network are set up to either communicate
indirectly through a central place -- an Access Point (AP); or directly,
one to the other. The prior one is called "Infrastructure Mode" and the
other one is called "Ad Hoc Mode" (also referred as peer-to-peer).
Ad Hoc Mode does not require an Access Point. It is easier to set
up, especially in a small or temporary network.
NOTE: You may select either mode for your wireless network;
however, all devices communicating directly with each other
must operate in the same mode.

- Choose A Wireless Network

This function enables the unit to scan for available wireless network
connections in the surrounding area and list them on the table,
shown as below figure:
Mode
Infrastructure
Infrastructure
Choose A Wireless Network
ESSID
Wireless-ap
zeroneoffice
User's Manual
ENCRYPT
OFF
OFF
24