Per Channel Config; Channel Select; Video Loss Detect; Motion Detect - Ness Premium H.264 DVR Setup Manual

< Per Channel Config >
This menu is used to configure the <Video Loss Detect>, <Motion Detect>, <Alarm In> and
<Alarm Out> settings for each channel. The menu is displayed as below.

1. Channel Select

2. Video Loss Detect

3. Motion Detect

4. Detection Config

5. Alarm In
6. Alarm Out
Channel Select
The item is used to select a desired channel for setting the parameters. Move
the cursor to <Channel Select> and press ENTER, then select a channel
using UP / DOWN keys. Press ENTER again to confirm the setting.
Video Loss Detect
This item allows users to enable / disable Video Loss acknowledged as an
alarm event. Select <ON> to enable Video Loss acknowledged as alarm
events, <OFF> to disable.
Motion Detect
Use to enable or disable the motion detection function of the Premium H.264
DVR. If motion detection function is enabled, it is required to define the motion
detection parameters such as detection area and sensitivity settings.
Detection Config
If motion detection function is enabled, it is required to define the motion
detection parameters such as detection area and sensitivity settings. Select a
channel for setting the parameters, move the cursor to <Detection Config>
and press ENTER. The Detection Configuration menu displays as follows.
1. Detected Area Setup
2. Sensitivity
3. Area Threshold

Per Channel Config

Detection Config
40%
▲
User's Manual
CH1
ON
ON
OFF
None
88%
6%
66