Table of Contents
Advertisement
User's Manual
Trigger Port
To avoid the default service port (port 80) being jammed, the item enables
users to change port 80 to another port.
To change the trigger port, move the cursor over <Trigger Port> and press
ENTER, then adjust the setting using UP / DOWN keys.
Email Address
This item is used to edit the e-mail address where alarm event information will
be sent. Follow these steps to setup the e-mail address.
• Select <Email Address> from Network Setup menu and press ENTER. A
virtual keyboard displays.
• Use Direction keys to move the cursor for selecting from characters.
• Press ENTER to add the selected character to the password entry field.
• When it's done, move the cursor to <OK> and press ENTER to save the
settings and exit.
SMTP Setup
Simple Mail Transfer Protocol (SMTP), a protocol for sending e-mail
messages between servers. SMTP is a relatively simple, text-based protocol
that one or more recipients of a message are specified and the message text
is transferred.
Select < SMTP Setup> from Network Setup menu and press ENTER; the
menu displays as follows.
- Email via SMTP
- SMTP Server
35
1. Email via SMTP
2. SMTP Server
3. SMTP Port
4. SMTP Account
5. SMTP Password
The item enables users to determine if the unit sends e-mail via
SMTP. Select <ON> to send e-mail via SMTP using direction keys; if
not, select <OFF>.
This item enables users to set the SMTP server. Contact your
network service provider for more specific information.
SMTP Setup
ON
25
Advertisement
Table of Contents
