Table of Contents
Advertisement
User's Manual
Sequence Setup
The Sequence Setup menu allows users to set the camera sequence schedule and dwell
time for main and call monitor. Select <Sequence Setup> in Main menu and press ENTER;
the menu displays as follows. Items in the Sequence Setup menu are described in the
subsections.
1. Main Monitor Dwell
2. Main Monitor Schedule
3. Call Monitor Dwell
4. Call Monitor Schedule
NOTE: When the second main monitor is connected, there will be extra menu items
for configuring dwell and schedule settings of the second main monitor.
< Main / Call Monitor Dwell >
The Main / Call Monitor can be set to display full screen video of all installed cameras in
sequence. This item is used to set the Main / Call Monitor dwell time, which is the duration
of time elapsed before switching to the next channel. The dwell time is in the range of 1 to
120 seconds.
< Main / Call Monitor Schedule >
This item is used to set the Main / Call Monitor camera sequence in full screen format.
Move the cursor to <Main Monitor Schedule> and press ENTER; the menu is displayed as
follows.
Follow these steps to set a sequence:
• Press LEFT direction key to delete the original setting.
• Press the desired Channel keys to assign a camera to that location in the sequence.
• Continue the steps until the sequence is completed.
A sequence can have up to 16 entries. User can select fewer than 16 entries for camera
sequence and leave the remaining entries blank. The sequence can include a specific
camera or cameras multiple times.
61
Sequence Setup
Main Monitor Schedule
_►_►_►_►_►_►_►_►_
►_►_►_►_►_►_►_
Press Channel Keys To Select Channel
Press ◄ Key To Delete
5 Sec
5 Sec
Advertisement
Table of Contents
